Linear-turn Handwheel Customization
Regular without handwheel
After installing the handwheel, the manual operation is much more convenient than before, and it also increases the overall aesthetics
Product Features
●The actuator is designed with a built-in servo system, no additional servo amplifier is needed, it only needs to be connected with DC4-20mA (or DC1-5V) signal and AC220V single-phase power supply to work. There are wiring terminals inside, and the wiring is extremely simple and convenient. The key part of the actuator - the controller, adopts the most advanced hybrid integrated circuit, is potted with resin, has a box shape, small volume, and high reliability.
●Feedback detection of position quantity adopts high-performance conductive plastic potentiometer, resolution <0.4, with extremely high life and reliability.
●Self-diagnosis function, when a fault occurs, the indicator light on the controller will send out an indication signal immediately.
●Use the state dial switch to set the off signal, the spool is in fully open, fully closed or self-locking state.
●Positive and negative actions can be set with the status dial switch.
●The input signal can be set as DC4-20mA or DC1-5V by the status dial switch.
●Intelligent stall protection technology: No matter where the actuator is stalled, the internal stall protection will protect the motor within 4 seconds and shut off the power supply of the motor. Even if the controller is strongly disturbed and the internal relay is broken down and short-circuited, the internal locked-rotor protection will shut down the motor within 4S, so that the motor will not be damaged.
●Automatic stall release technology. According to the setting of the user's DIP switch, when the actuator is blocked, it can be reversed for 1 second to remove the blocking. If there is still a blocking at this time, the controller will perform blocking protection, alarm and turn off all motor outputs. . The user can also input a signal to make the motor run in the opposite direction to release the protection manually.
●Electronic brake: accurate and stable positioning, which solves the wear and tear and inaccurate positioning of traditional mechanical brakes. ●Intelligent anti-instantaneous reverse technology: During the operation of the actuator, the time delay is inserted during the forward and reverse switching process, which reduces the impact on the valve, the motor deceleration device and the actuator, improves the overall reliability and prolongs the service life.
●It is easy to adjust the working zero position (starting point) and full position (end point).
●In the event of a sudden power failure, it can ensure that the spool is self-locking.
●Adopt synchronous belt drive, effectively reduce noise.
●High reliability: High-performance microcontroller is used inside, and the reliability of its software and hardware conforms to industrial standards.
Cooperative Customers
Company History
Populární Tagy: handwheel customization linear-turn electric actuator 220v 380v, China, manufacturers, suppliers, factory, buy, price, quotation
