D671X Pneumatic Wafer Butterfly Valve

D671X Pneumatic Wafer Butterfly Valve
Podrobnosti:
Pneumatic butterfly valve is a valve whose valve plate rotates around a fixed axis perpendicular to the channel. It is composed of a pneumatic actuator and a butterfly valve. Pneumatic butterfly valve is a pneumatic valve that uses a circular butterfly plate that rotates with the valve stem to open and close to achieve the activation action. It is mainly used as a shut-off valve, and can also be designed to have the function of regulation or shut-off valve and regulation.
Odeslat dotaz
Popis
Odeslat dotaz

Pneumatic butterfly valve

 

 

 

 

Pneumatic butterfly valve

 

Nominal diameter: DN40~DN1000

Nominal pressure: 1.0~1.6MPa

Applicable temperature: -30C~+180C

Valve body material: ductile iron, WCB carbon steel, 304/316 stainless steel, the surface is fully lined with polytetrafluoroethylene (PTFE) or F46 fluoroplastic to form a corrosion-resistant isolation layer

Butterfly plate material: 304, 316L stainless steel

Connection form: wafer type or flange type, in line with GB/T9113, JB/T79 and other standards

Pneumatic actuator: single-acting (spring return) or double-acting piston type, air supply pressure 0.3~0.8MPa

Control mode: support ON-OFF type (with solenoid valve) or modulating type (with electric positioner), input 4~20mA signal to achieve flow control

 

 

APPLICATIONS

 

 

Pneumatic butterfly valve

 

 

single acting

 

double acting

 

 

The feedback device, also called limit switch, is a feedback device used for the stroke, size, and position of mechanical movement. The computer observes and controls the state of mechanical movement.

Feedback device

 

Solenoid valve is a basic component for controlling fluids and is used in industrial control systems to adjust the direction, flow, speed and other parameters of the medium.

 Solenoid valve

 

A large amount of compressed air containing water enters the filter and moves in a centrifugal downward tilt. The entrained water is separated due to the reduced speed, and the clean air is discharged from the separator outlet.

Filter

 

The aluminum alloy anti-rust and anti-corrosion coating is more resistant to high temperatures. The manual device can be switched to manual control immediately on site in case of control failure.

Manual device

 

Chemical Industry

Challenges: Highly corrosive media such as chlorine-alkali and sulfur recovery can easily cause valves to rust and fail.

Solution: 316L stainless steel valve body + metal seal, passed NACE MR0103 standard, corrosion-resistant.

 

 

Food and Pharmaceuticals

Challenges: High media hygiene requirements, cross contamination must be avoided.

Solution: Mirror polishing + full bore design.

 

Ocean

Challenge: High salt spray environment accelerates metal oxidation and seals are prone to failure.

Solution: Ultra-low carbon stainless steel + EPDM sealing ring.

 

 

Populární Tagy: d671x pneumatic wafer butterfly valve, China, manufacturers, suppliers, factory, buy, price, quotation

Odeslat dotaz